Projects/Micro Reflow Oven: Difference between revisions
Jump to navigation
Jump to search
(Created page with "The goal is to be able to easily and cheaply produce small SMD PCB boards at home. <videoflash>o_SwxI2KTys</videoflash> == The Challenge == Create a device to run a PCB thou...") |
|||
| Line 5: | Line 5: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
! | ! Parameters !! Priority !! Notes | ||
|- | |- | ||
| 1.5 x 1 inch PCB size, 0.75 inch height || MUST || Targeted at small SMD boards only. | | 1.5 x 1 inch PCB size, 0.75 inch height || MUST || Targeted at small SMD boards only. | ||
Revision as of 05:50, 14 February 2016
The goal is to be able to easily and cheaply produce small SMD PCB boards at home.
The Challenge
Create a device to run a PCB though a temperature profile. Requirements and constraints:
| Parameters | Priority | Notes |
|---|---|---|
| 1.5 x 1 inch PCB size, 0.75 inch height | MUST | Targeted at small SMD boards only. |
| Close loop temperature control | MUST | |
| Programmable temperature profile | MUST | |
| Wifi connected | MUST | This is to log the actual temperature profile |
| Live chart | MUST | |
| Portable i.e. it fits in a pocket | want | |
| Battery powered | want | The heat source could be external e.g. stove, heatgun, iron, solar, ... |
| Live video stream | want | Ideally overlaid with current temperature. |
| TFT screen and buttons | want | Touch screen preferred. Rotary encoder ok. |
Design