Projects/Micro Reflow Oven: Difference between revisions

From Playful Exploration
Jump to navigation Jump to search
Line 26: Line 26:
|}
|}


== Design ==
== Design 1 ==
<uml>
<uml>
[Circuit Board] as PCB
[Circuit Board] as PCB
Line 46: Line 46:
</uml>
</uml>


http://www.claustemp.com/an-htp15.htm
== Design 2 ==
<uml>
[Circuit Board] as PCB
[PCB Temperature\n(Thermocouple Type K)] as T1
[Room Temperature\n(Thermocouple Type K)] as T2
[ADC\n(ADS1115)] as ADC
[MCU\n(ESP8266)] as MCU
[UI\n(Tablet/SmartPhone)] as UI
[Heat Source\n(External)] as H
[Air Mixer] as M
[Ventilator] as V
Actor User as USER
[PCB] ..> [T1]
[PCB] <. [M]
[T1] -> [ADC]
[ADC] -> [MCU]
[H] ..> [M]
[M] <- [V]
[V] <.. [MCU]
[MCU] <-- [T2]
[MCU] <.> [UI]
[UI] <.> USER
</uml>

Revision as of 06:18, 14 February 2016

The goal is to be able to easily and cheaply produce small SMD PCB boards at home.

The Challenge

Create a device to run a PCB though a temperature profile. Requirements and constraints:

Parameters Priority Notes
1.5 x 1 inch PCB size, 0.75 inch height MUST Targeted at small SMD boards only.
Close loop temperature control MUST Peek temperature is 260C / 500F.
Programmable temperature profile MUST
Wifi connected MUST This is to log the actual temperature profile
Live chart MUST
Portable i.e. it fits in a pocket want
Battery powered want The heat source could be external e.g. stove, heatgun, iron, solar, ...
Live video stream want Ideally overlaid with current temperature.
TFT screen and buttons want Touch screen preferred. Rotary encoder ok.

Design 1

Adobe SVG Viewer plugin (for Internet Explorer) or use Firefox, Opera or Safari instead.

Design 2

Adobe SVG Viewer plugin (for Internet Explorer) or use Firefox, Opera or Safari instead.