SBC Cases: Difference between revisions

From Playful Exploration
Jump to navigation Jump to search
(Created page with "category:rpicategory:r2a2 == basic Raspberry Pi cases == == Interesting function cases == *[http://www.mcmelectronics.com/content/ProductData/Spec%20Sheets/21-14595....")
 
No edit summary
 
(3 intermediate revisions by one other user not shown)
Line 1: Line 1:
[[category:rpi]][[category:r2a2]]
[[category:rpi]][[category:r2a2]] [[category:3D]]


== basic Raspberry Pi cases ==
== basic Raspberry Pi cases ==
== Laser cut case for Pi 2 with Camera ==
*[https://www.thingiverse.com/thing:818475 Holds camera too]


== Interesting function cases ==
== Interesting function cases ==
*[http://www.mcmelectronics.com/content/ProductData/Spec%20Sheets/21-14595.pdf interesting approach]
 
Non-SBC specific.  Allows mounting SBC and prototype boards and then roll up into a box with connnections intact.  Clever!
*[http://www.jameco.com/Jameco/Products/ProdDS/2204357.pdf interesting approach]
*[http://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_2204357_-1 Available at Jameco]
*[http://www.jameco.com/Jameco/Products/ProdDS/2204357UsersManual.pdf Instructions]
 
 
== Specs for Raspberry Pi ==
=== Mounting Holes are M2.5 ==
[http://www.mcmaster.com/#machine-screws/=12xbvqc M2.5 screws from McMaster-Carr]

Latest revision as of 20:58, 19 June 2016


basic Raspberry Pi cases

Laser cut case for Pi 2 with Camera

Interesting function cases

Non-SBC specific. Allows mounting SBC and prototype boards and then roll up into a box with connnections intact. Clever!


Specs for Raspberry Pi

= Mounting Holes are M2.5

M2.5 screws from McMaster-Carr