Projects/Micro Reflow Oven: Difference between revisions
Jump to navigation
Jump to search
(→Design) |
|||
| Line 26: | Line 26: | ||
|} | |} | ||
== Design == | == Design 1 == | ||
<uml> | <uml> | ||
[Circuit Board] as PCB | [Circuit Board] as PCB | ||
| Line 46: | Line 46: | ||
</uml> | </uml> | ||
== Design 2 == | |||
<uml> | |||
[Circuit Board] as PCB | |||
[PCB Temperature\n(Thermocouple Type K)] as T1 | |||
[Room Temperature\n(Thermocouple Type K)] as T2 | |||
[ADC\n(ADS1115)] as ADC | |||
[MCU\n(ESP8266)] as MCU | |||
[UI\n(Tablet/SmartPhone)] as UI | |||
[Heat Source\n(External)] as H | |||
[Air Mixer] as M | |||
[Ventilator] as V | |||
Actor User as USER | |||
[PCB] ..> [T1] | |||
[PCB] <. [M] | |||
[T1] -> [ADC] | |||
[ADC] -> [MCU] | |||
[H] ..> [M] | |||
[M] <- [V] | |||
[V] <.. [MCU] | |||
[MCU] <-- [T2] | |||
[MCU] <.> [UI] | |||
[UI] <.> USER | |||
</uml> | |||
Revision as of 06:18, 14 February 2016
The goal is to be able to easily and cheaply produce small SMD PCB boards at home.
The Challenge
Create a device to run a PCB though a temperature profile. Requirements and constraints:
| Parameters | Priority | Notes |
|---|---|---|
| 1.5 x 1 inch PCB size, 0.75 inch height | MUST | Targeted at small SMD boards only. |
| Close loop temperature control | MUST | Peek temperature is 260C / 500F. |
| Programmable temperature profile | MUST | |
| Wifi connected | MUST | This is to log the actual temperature profile |
| Live chart | MUST | |
| Portable i.e. it fits in a pocket | want | |
| Battery powered | want | The heat source could be external e.g. stove, heatgun, iron, solar, ... |
| Live video stream | want | Ideally overlaid with current temperature. |
| TFT screen and buttons | want | Touch screen preferred. Rotary encoder ok. |
Design 1
Design 2