Projects/Micro Reflow Oven

From Playful Exploration
Revision as of 05:50, 14 February 2016 by Peter (talk | contribs) (→‎The Challenge)
Jump to navigation Jump to search

The goal is to be able to easily and cheaply produce small SMD PCB boards at home.

The Challenge

Create a device to run a PCB though a temperature profile. Requirements and constraints:

Parameters Priority Notes
1.5 x 1 inch PCB size, 0.75 inch height MUST Targeted at small SMD boards only.
Close loop temperature control MUST
Programmable temperature profile MUST
Wifi connected MUST This is to log the actual temperature profile
Live chart MUST
Portable i.e. it fits in a pocket want
Battery powered want The heat source could be external e.g. stove, heatgun, iron, solar, ...
Live video stream want Ideally overlaid with current temperature.
TFT screen and buttons want Touch screen preferred. Rotary encoder ok.

Design

Adobe SVG Viewer plugin (for Internet Explorer) or use Firefox, Opera or Safari instead.

http://www.claustemp.com/an-htp15.htm