Projects/Micro Reflow Oven
Jump to navigation
Jump to search
The goal is to be able to easily and cheaply produce small SMD PCB boards at home.
The Challenge
Create a device to run a PCB though a temperature profile. Requirements and constraints:
| Parameters | Priority | Notes |
|---|---|---|
| 1.5 x 1 inch PCB size, 0.75 inch height | MUST | Targeted at small SMD boards only. |
| Close loop temperature control | MUST | Peek temperature is 260C / 500F. |
| Programmable temperature profile | MUST | |
| Wifi connected | MUST | This is to log the actual temperature profile |
| Live chart | MUST | |
| Portable i.e. it fits in a pocket | want | |
| Battery powered | want | The heat source could be external e.g. stove, heatgun, iron, solar, ... |
| Live video stream | want | Ideally overlaid with current temperature. |
| TFT screen and buttons | want | Touch screen preferred. Rotary encoder ok. |
Design 1
Design 2